LeakSmart Water Valve driver for Hubitat
Hubitat LeakSmart Water Valve driver , Hubitat Iris Water Valve driver ,leaksmart driver hubitat
I created this driver to give better battery reports and detect the power getting disconnected. the internal drivers were having problems with this.
LeakSmart Valve FCC ID: W7Z-ZICM357SP2 PDF Manual is here
Repo link is here Import link for Hubitat
To reset the valve controller, rapidly press the center button 5 times. The Blue LED light will begin to flash indicating it is reset and ready to join the system.
Note:
The device may require a power cycled before a reset. Removing AC adapter and bat. Then power back up.
tested on
leakSMART Water Valve v2.10 Firmware: 113B-03E8-00000019 Mains detection works on this valve
WAXMAN Model: House Water Valve – MDL-TBD Firmware: 113B-03E8-0000001D softwareBuild: 0000001D Mains detection is giving false mains reports. On this valve battery will be detected when battery starts going down.
We need to know your fingerprints and if the mains report is working or reporting mains all the time.. MDL-TBD stands for ‘to be determined’ So I cam calling this V1.
There are 2 battery test in this version one is what is reported the other is estimated which is a test. Originally battery was not reporting on my valve now it is Est bat level is for debuging.
If your using this please post a comment no need to register here
